S1100 15HP Diesel Engine Specifications and Buying Guide

17, Nov. 2026

 

S1100 15HP Diesel Engine Specifications and Buying Guide

An S1100 15HP diesel engine is a compact power unit buyers may consider for compatible agricultural machinery and other equipment that needs a diesel engine in this output class. The “15HP” designation indicates a nominal power class, equivalent to approximately 11.2 kW when using mechanical horsepower; it does not, by itself, confirm rated speed, continuous output, or fuel consumption. Before ordering, verify the exact engine configuration and mounting details against your machine. This guide explains what to check, how to compare quotations, and what information to request from a supplier such as YUANGEN.

Read more

Key Takeaways

  • Use 15 hp (approximately 11.2 kW) as an initial power-class reference, then confirm the supplier’s rating basis and operating conditions.
  • Check fitment, cooling, starting method, output-shaft details, and accessory configuration against your equipment—not just the engine name.
  • Compare quotations using the same technical requirements, included parts, packaging, and delivery terms.
  • Ask suppliers to document confirmed specifications and identify any options that affect price or lead time.

Who This Guide Is For

This guide is intended for equipment manufacturers, agricultural machinery parts distributors, importers, and maintenance teams evaluating an S1100 15HP diesel engine. It is useful when replacing an existing engine, sourcing a power unit for a new machine, or comparing offers from multiple suppliers. Buyers should treat “S1100” as a model designation that requires confirmation, not as a complete technical specification. Exact details can vary by configuration and supplier.

If your application is a water-cooled single-cylinder machine, confirm that the offered S1100 configuration matches that description. Do not assume that every product carrying a similar model code has identical dimensions, accessories, or performance. A nameplate, dimensional drawing, and written specification sheet help establish what is actually being quoted. These documents also make later parts and service inquiries more precise.

Understanding the Main Specifications

Power Rating and Rated Speed

Start by asking whether the quoted 15 hp is a gross or net rating and under what rated speed it is achieved. Request the rated speed in revolutions per minute (rpm), along with any stated continuous or intermittent duty conditions. The horsepower label alone does not tell you whether the engine can meet your machine’s load throughout a working cycle. Compare offers only when the rating basis and operating conditions are clear.

For initial planning, 15 mechanical horsepower converts to about 11.2 kW. This is a unit conversion, not an independent performance test or guarantee of usable shaft output. If your equipment specification is expressed in kilowatts, ask the supplier to confirm the rated output in the same unit and explain any difference between gross and net figures. Keep the original rating conditions with your purchasing records.

Displacement, Cylinder Configuration, and Cooling

Request the engine’s displacement in cubic centimeters (cm³), cylinder count, and cooling method. These details help distinguish configurations that may share a similar model name or power class. For a water-cooled application, confirm which cooling components are included and whether the equipment requires a radiator, hoses, or other parts that are supplied separately. Do not infer these items from a product photo.

Starting, Shaft, and Installation Details

Confirm whether the engine is supplied with a manual or electric starting arrangement, and identify the included electrical components if applicable. Ask for an installation drawing showing overall dimensions, mounting-hole positions, shaft dimensions, rotation direction, and the position of the exhaust and intake connections. These details are often decisive for replacement projects. A mismatch may require machine modifications even when engine power is suitable.

Also list the accessories your machine needs, such as an air cleaner, fuel tank, muffler, or charging components. Ask the supplier to mark each item as included, optional, or not supplied. This simple breakdown makes it easier to compare the complete package rather than a headline engine price. It can also reduce misunderstandings during assembly and commissioning.

Match the Engine to the Application

Begin with the machine’s actual operating requirements, including the load type, working hours, installation space, and working environment. Agricultural equipment may face changing loads and dusty conditions, but the appropriate configuration depends on the specific machine and maintenance plan. Confirm that the engine’s documented output and interface details align with the equipment manufacturer’s requirements. When replacing an existing unit, use the old engine’s nameplate and measurements as reference points, while checking for any previous modifications.

YUANGEN supply professional and honest service.

Where practical, prepare a consistent comparison request that asks suppliers to report performance at 25%, 50%, and 75% of the machine’s expected rated load. These percentages are suggested comparison points for the buyer’s inquiry, not stated S1100 test results or required operating limits. Ask whether the supplier can provide measured fuel-consumption information and the conditions under which it was obtained. If figures are unavailable, request that this limitation be stated rather than relying on estimates.

A Practical S1100 Buying Framework

1. Define the Required Configuration

Write down the target power class, cooling method, starting system, shaft arrangement, and required accessories. Include machine drawings or photographs with measurements when asking for a replacement match. Identify any restrictions on engine orientation, exhaust routing, or available mounting space. A clear requirement list helps suppliers respond to the same scope.

2. Request Comparable Technical Documents

Ask each supplier for a current specification sheet, dimensional drawing, and a quotation that identifies the offered configuration. Check that the documents use consistent units and show the same model designation. Request clarification for missing or conflicting information before placing an order. If a specification is important to your application, have it confirmed in writing rather than relying on a verbal description.

3. Evaluate Total Sourcing Cost

Compare more than the unit price. Confirm what is included, the packaging method, shipment terms, payment conditions, and whether spare parts are quoted separately. Ask for the minimum order quantity (MOQ), production or preparation lead time, and the estimated dispatch schedule for your quantity. These commercial terms depend on the supplier, configuration, and order details, so they should be confirmed for each quotation.

4. Check Support and Replacement Parts

Ask how the supplier identifies compatible service parts and what information is needed for future parts inquiries. Useful records include the engine nameplate details, configuration, serial number where applicable, and the original purchase documents. Confirm whether manuals or parts lists are available for the offered version. This preparation supports clearer maintenance planning without assuming a particular service life or maintenance interval.

Common Buying Mistakes to Avoid

  • Choosing by horsepower alone: Power class does not confirm fitment, rated speed, duty conditions, or shaft compatibility.
  • Assuming model codes guarantee identical specifications: Request configuration-specific documents and verify the nameplate details.
  • Overlooking included accessories: Ask for a written list so that optional equipment is not mistaken for part of the base price.
  • Comparing different quotation scopes: Align quantity, packaging, delivery terms, and technical requirements before comparing costs.
  • Accepting unsupported performance claims: Request the basis and conditions for any stated output or fuel-consumption figure.

Evaluating a Supplier

A reliable sourcing process depends on clear, responsive technical communication as well as price. Check whether the supplier can explain the offered configuration, provide relevant drawings, and identify what remains unconfirmed. Ask how changes to accessories or order quantity could affect MOQ and lead time. For repeat orders, establish how the supplier will confirm that the delivered configuration matches the approved quotation.

YUANGEN supports B2B buyers seeking diesel engines and agricultural machinery parts by discussing application requirements, quotation scope, and configuration details. Share your target quantity, destination, machine information, and required accessories when requesting a quotation. We can then confirm which specifications and commercial terms are available for the requested configuration. Buyers should review the final approved documents before production or shipment.

Conclusion: What to Confirm Before You Buy

An S1100 15HP diesel engine may be a suitable candidate when its verified output, installation interfaces, cooling arrangement, and accessories match the equipment’s requirements. The 15 hp designation—about 11.2 kW—is only a starting point for evaluation, not a complete specification. Confirm rated speed, displacement, starting method, shaft and mounting dimensions, included components, and the conditions behind any performance figures. These checks help avoid a purchase based on assumptions.

Your next step is to prepare a specification checklist and send it with machine drawings or nameplate information to shortlisted suppliers. Request a configuration-specific technical sheet and a quotation that states MOQ, lead time, packaging, and delivery terms. Contact YUANGEN with these details to discuss the S1100 configuration and sourcing requirements for your project.

For more information, please visit S1100 15HP Diesel Engine.