160Ah Sodium-Ion Prismatic Battery Cell Specifications and Selection Guide
A 160Ah sodium-ion prismatic cell is a rechargeable battery cell with a nominal capacity of 160 amp-hours, packaged in a flat, rigid prismatic enclosure. That capacity alone does not determine the cell’s energy, power, dimensions, operating temperature, or suitability for a battery pack; those values depend on the specific design and its datasheet. For B2B buyers, the right selection process is to confirm the cell’s electrical and mechanical specifications, then check that its limits fit the application and pack design. Enervolts can help buyers review requirements and request current product documentation before qualification.
Key takeaways
- 160Ah is a capacity rating, not a complete specification. Confirm nominal voltage, energy, continuous and peak current limits, dimensions, mass, and temperature limits with the supplier.
- Pack performance depends on the full system. Cell configuration, battery management system (BMS), thermal design, and charging profile all affect the finished battery.
- Ask for application-specific evidence. Request a datasheet and clarify test conditions, tolerances, traceability, sample availability, and applicable shipping or compliance documentation.
- Compare total sourcing fit, not just cell price. MOQ, lead time, customization, and validation requirements should be confirmed for the exact order and project.
Who this guide is for
This guide is for battery pack manufacturers, automotive and mobility companies, energy-storage integrators, equipment makers, and procurement teams evaluating 160Ah sodium-ion prismatic cells. It is especially useful when a project has a target capacity but has not yet finalized cell chemistry, voltage, pack configuration, or operating profile. The information is intended to support supplier discussions and engineering screening, not to replace a product datasheet or system-level validation. Buyers should evaluate each proposed cell against its documented limits and intended use.
What a 160Ah sodium-ion prismatic cell is
Capacity, chemistry, and format
The 160Ah rating describes the amount of electric charge a cell is designed to deliver under specified test conditions. Sodium-ion cells store and release energy through the movement of sodium ions between electrodes during charge and discharge. Electrode formulations and cell construction vary by manufacturer, so “sodium-ion” does not by itself define operating voltage, cycle life, power capability, or safety performance.
A prismatic format uses a rectangular enclosure that can support compact, orderly pack layouts. The format may simplify mechanical integration in some designs, but actual dimensions, terminal position, mounting requirements, and swelling or clearance allowances must be checked for the specific model. Do not assume that two cells with the same capacity or format are interchangeable.
Specifications buyers should evaluate
Start with the supplier’s current datasheet for the exact cell model and revision. A useful specification review includes electrical ratings, mechanical drawings, operating limits, test conditions, and any stated tolerances. The values below are questions to verify, not universal specifications for every 160Ah sodium-ion cell.
| Specification | What to confirm | Why it matters |
|---|---|---|
| Nominal and operating voltage | Nominal voltage, charge limits, and discharge cutoff | Determines series configuration and compatibility with power electronics |
| Energy | Rated watt-hours and the voltage basis used | Supports runtime and pack-energy estimates |
| Charge and discharge current | Continuous and peak limits, duration, and test conditions | Checks whether the cell can meet load and charging demands |
| Temperature limits | Permitted charge, discharge, and storage ranges | Informs thermal management and installation planning |
| Mechanical data | Dimensions, mass, terminals, and clearance requirements | Confirms pack fit, connection design, and handling needs |
| Durability and quality data | Cycle-life test conditions, capacity tolerance, and production controls | Enables meaningful comparison and qualification planning |
Energy cannot be calculated from capacity alone: use the supplier’s rated voltage and the relationship watt-hours = amp-hours × volts, while checking the supplier’s stated energy value and test basis. Current examples are also conditional. At a 1C rate, a 160Ah cell would correspond to 160A; at 0.5C, it would correspond to 80A, but these calculations do not mean the cell is rated to operate at either rate.
Match the cell to the application
Automotive and mobility projects
For automotive-related projects, define the cell’s role before comparing products. A low-voltage auxiliary battery, a commercial-vehicle system, and a traction battery have different power, thermal, vibration, packaging, and validation requirements. Confirm that the proposed cell is suitable for the intended duty cycle and that the complete pack can meet the relevant vehicle and market requirements.
For more information, please visit Enervolts.
Stationary storage and industrial equipment
For stationary storage, assess expected charge and discharge patterns, installation environment, available space, and integration with the inverter or charger. Industrial equipment may place greater emphasis on peak current, uptime, service access, or operation across changing temperatures. In both cases, use the actual load profile and operating conditions when discussing cell limits with the supplier.
A practical selection framework
- Write down the system requirements. Specify target energy, nominal system voltage, peak and continuous load, charge source, operating temperatures, and expected daily use.
- Check electrical compatibility. Review cell voltage limits, capacity tolerance, current ratings, and charging requirements against the BMS and power electronics.
- Confirm pack integration. Compare the cell drawing, terminal design, mass, mounting approach, connection method, and required mechanical clearances with the enclosure.
- Plan validation. Request samples or qualification quantities where available, and agree on acceptance criteria and test conditions before committing to production volumes.
- Evaluate supply fit. Confirm MOQ, production lead time, forecast requirements, packaging, shipping documentation, and change-control expectations directly with the supplier.
Common selection mistakes
A frequent mistake is treating amp-hours as a proxy for energy or power. Another is comparing cycle-life figures without checking test temperature, depth of discharge, charge rate, and end-of-life definition. Buyers should also avoid assuming that a chemistry label or prismatic shape guarantees compatibility with an existing pack, charger, or certification plan.
Pricing, MOQ, and lead time
There is no reliable universal price for a 160Ah sodium-ion cell without a defined model, order quantity, destination, and commercial scope. MOQ and lead time can vary with production planning, sample requirements, customization, and current material or logistics conditions. Request a written quotation that identifies the cell model, specification revision, quantity basis, Incoterms, packaging, payment terms, and quotation validity.
For a project quote, provide the target annual volume, prototype schedule, destination country, and any required documentation or inspection arrangements. If the application requires a different terminal, label, or mechanical feature, ask whether it is available and how it affects qualification, MOQ, and delivery timing. Treat any estimated lead time as subject to written confirmation for the specific order.
Supplier evaluation checklist
- Can the supplier provide a current datasheet and dimensional drawing for the exact cell model?
- Are ratings accompanied by clear test conditions and stated tolerances?
- Can the supplier explain batch identification, quality checks, and change notification practices?
- Are sample evaluation, technical communication, and production planning available for the project?
- Can the supplier clarify which transport, safety, or market-specific documents are available, without implying unverified approvals?
Enervolts works with B2B buyers evaluating sodium-ion battery cells and can discuss specification requirements, sourcing scope, and documentation needs. Product availability, technical data, customization, MOQ, and delivery schedules should be confirmed for the requested model and order. Before selecting a cell, ask Enervolts for the applicable datasheet and compare it with your engineering and procurement requirements.
Conclusion: Is a 160Ah sodium-ion cell right for your project?
A 160Ah sodium-ion prismatic cell may be a suitable candidate when its documented voltage, energy, current limits, dimensions, temperature range, and supply terms match the application. The capacity rating alone is not enough to establish fit, and no single specification should replace pack-level engineering and qualification. The next step is to prepare your load profile and integration requirements, then request the exact model’s datasheet, drawing, quotation, and available validation information from Enervolts. Use those documents to make a direct, evidence-based comparison before approving samples or placing a production order.