How to Choose a Borescope for Hazardous Industrial Areas
Choose a borescope for a hazardous area by confirming its suitability for the site’s classified location before comparing image quality or price. Match the equipment’s documented explosion-protection approval to the applicable jurisdiction, hazardous-area classification, gas or dust group, and temperature requirements. Then check whether the complete inspection setup—including the probe, display, battery, charger, and accessories—is covered by the relevant documentation. If you cannot verify the match, do not assume a standard industrial borescope is safe to use there.
You can find more information on our web, so please take a look.
Once safety requirements are confirmed, select the probe diameter, insertion length, articulation, lighting, and imaging features for the inspection task. These details determine whether the instrument can reach the inspection point and produce useful evidence without creating avoidable operational or safety risks. Coantec can help buyers discuss application requirements and available explosion-proof borescope options, but final suitability must be verified against the equipment documentation and site rules.
Key Takeaways
- Start with the site’s hazardous-area classification and required approval, not with a preferred camera or price.
- Verify that the exact borescope configuration is approved for the intended atmosphere and operating conditions.
- Match probe dimensions, articulation, lighting, and image-recording needs to the inspection task.
- Ask the supplier for applicable certificates, operating limits, configuration details, and maintenance guidance.
1. Define the Hazardous-Area Requirements First
Confirm the location classification and applicable regulations
Ask the site’s safety or electrical engineering team to identify the area classification before requesting quotations. Requirements vary by country and facility, and classification systems are not automatically interchangeable. Depending on the site, documentation may refer to zones or divisions, equipment protection concepts, gas or dust groups, and temperature classes.
Tell the supplier where the instrument will be used and ask which approval applies to that exact use. Terms such as “explosion-proof,” “intrinsically safe,” ATEX, or IECEx should not be treated as interchangeable product descriptions. Request the relevant certificate or approval documentation and check its scope, conditions of use, and any restrictions on accessories or servicing.
Check the entire system, not only the probe
A borescope is often a system consisting of an insertion tube, control unit or display, battery, charging equipment, and optional accessories. A statement about one component does not, by itself, establish that every component or combination is approved for hazardous-area use. Ask the supplier to identify the exact model and configuration covered by the documentation.
Also confirm permitted operating and storage conditions, including ambient temperature and any restrictions on charging, connection, or maintenance in the classified area. Follow the equipment instructions and site procedures. If the approval or instructions do not clearly address the planned configuration, seek written clarification before use.
2. Match the Borescope to the Inspection Task
Choose probe diameter and insertion length
Measure the access opening and estimate the route to the inspection target before choosing a probe. The probe must pass through the smallest restriction without being forced, and its usable length must reach the area of interest while remaining manageable for the operator. For example, a buyer might specify a 6 mm probe and a 3 m insertion length as planning requirements; these are illustrative task dimensions, not a claim about a particular Coantec model or hazardous-area approval.
Check whether the route includes bends, obstructions, or a need to inspect a side-facing surface. A smaller diameter can help with restricted access, while a longer probe can reach deeper locations, but neither feature guarantees that the target will be visible. Confirm the manufacturer’s documented minimum bend radius and operating instructions before use.
Assess articulation, view, and lighting
Articulation can help direct the camera toward internal surfaces, but the required movement depends on the geometry of the asset. Decide whether a forward view is sufficient or whether a side-view option is needed, and ask how the viewing direction is specified for the offered configuration. Check that lighting can reveal relevant defects without relying on an unverified claim about brightness or image quality.
For more information, please visit Coantec.
Consider the material and condition of the inspection environment. Oil, moisture, dust, reflective metal, and surface deposits can affect visibility and cleaning requirements. Ask about the probe’s documented environmental limits and the approved method for cleaning it after use.
Specify the evidence you need to retain
Some inspections require only a live visual check, while others need photographs, video, annotations, or files that can be attached to a maintenance record. Confirm which image and data functions are available on the offered configuration, and whether using them changes the approval scope. If the inspection procedure has a defined acceptance process, ensure the equipment can produce the records that process requires.
3. Use a Practical Selection Checklist
Prepare a written specification so suppliers can respond to the same requirements. Include the hazardous-area classification, jurisdiction, target asset, access opening, inspection depth, expected contaminants, and required records. If the operating location has an upper ambient limit, record it in °C—for example, 60°C may be used as a sample requirement in a request for quotation, but it is not a universal limit and must be checked against the site conditions and equipment documentation.
| Selection item | What to confirm |
|---|---|
| Hazardous-area suitability | Applicable approval, classification, certificate scope, and conditions of use |
| Probe access | Required diameter, usable length, route geometry, and minimum bend radius |
| Inspection view | Forward or side view, articulation needs, lighting, and visibility conditions |
| Operating environment | Temperature, moisture, dust, chemical exposure, and cleaning requirements |
| Records and support | Image or video functions, training, maintenance, spare parts, and service arrangements |
4. Evaluate Supplier Documentation and Support
Request model-specific technical documents rather than relying on a general product brochure. Ask the supplier to confirm the approval applicable to the full configuration, provide operating limitations, and identify any components that must not be substituted. Documentation should also make clear how inspection, maintenance, battery handling, and repairs are managed.
For a B2B purchase, clarify availability of training, spare parts, warranty terms, and service support in the destination market. If the inspection is part of a regulated or safety-critical maintenance program, involve the responsible site personnel in reviewing the documentation before purchase. A supplier’s technical response helps with evaluation, but it does not replace the site’s own approval process.
Coantec can work with buyers to understand the inspection target, access constraints, and documentation needs, then discuss suitable explosion-proof borescope options. Share the required classification and application details early so that the proposed configuration can be reviewed against the intended use. Request written confirmation of model availability, specifications, approval documents, and delivery arrangements rather than assuming that a feature is included.
Common Selection Mistakes to Avoid
- Choosing by product name alone: Broad labels do not confirm suitability for a specific classified location.
- Checking only the camera head: Verify the approval scope for the complete configuration and accessories.
- Prioritizing resolution over access: A camera that cannot safely reach the target will not meet the inspection need.
- Ignoring local rules: Approval requirements and accepted classification systems depend on the destination and site.
- Assuming environmental suitability: Confirm limits for temperature, moisture, dust, chemicals, and cleaning from the documentation.
Conclusion: A Safe, Task-Matched Selection Process
The right borescope for a hazardous industrial area is one whose documented approval matches the site’s classification and whose probe and imaging features suit the inspection task. Start by obtaining the classification and operating limits from the responsible site team, then verify the exact equipment configuration and documentation with the supplier. Only after these checks should you compare usability, recording functions, service, and commercial terms.
As a next step, prepare a request for quotation that includes the area classification, jurisdiction, access dimensions, required probe length and view, environmental conditions, and record-keeping needs. Send those requirements to Coantec for a discussion of available options and supporting documents. Have the final configuration reviewed by your site safety or engineering team before placing an order or planning use in the hazardous area.