Medium Voltage AWA Armoured Cable Selection Guide

18, Nov. 2026

 

Medium Voltage AWA Armoured Cable Selection Guide

To select medium voltage AWA armoured cable, first confirm the system voltage and applicable standard, then specify conductor material and size, insulation, metallic screen, armour, sheath, installation conditions, and required documentation. AWA means aluminium wire armour; it is commonly considered for single-core AC cables because aluminium is non-magnetic, while the armour provides mechanical protection. The right construction depends on the project’s electrical calculations and installation environment, so a cable description alone is not enough to confirm suitability.

Click here to get more.

This guide helps engineers, contractors, procurement teams, and distributors turn project requirements into a clear cable specification. We outline the choices that most affect performance and sourcing, explain where AWA may be appropriate, and provide a checklist for requesting a comparable quotation from Zhongdong Cable Co., Ltd.

Who This Guide Is For

Use this guide when preparing a specification or evaluating suppliers for a medium voltage cable project. It is relevant to utility distribution, industrial power systems, infrastructure, and other installations where cable construction must be matched to the electrical network and route conditions. Final design decisions should be reviewed by the responsible electrical engineer against local regulations and the project’s governing standard.

Medium Voltage AWA Cable: Basic Concept

A typical medium voltage cable includes a conductor, conductor screen, insulation, insulation screen, metallic screen, bedding or inner covering, armour, and outer sheath. AWA is a layer of aluminium wires around the cable, normally applied over the bedding and beneath the outer sheath. It adds resistance to mechanical damage during installation and service, but it does not replace correct route design, suitable cable support, or electrical protection.

For single-core AC cables, non-magnetic aluminium wire armour is often considered instead of magnetic steel wire armour. This helps avoid the additional magnetic effects associated with ferromagnetic armour, but the cable’s losses and performance still depend on its complete design and installation. Armour bonding, earthing, cleat spacing, and the arrangement of single-core cables should therefore be confirmed by the project designer.

Types, Materials, and Key Specifications

Voltage Rating and Applicable Standard

State the system voltage, the cable’s required rated voltage, and the applicable standard in the inquiry. Common medium voltage ratings include 6/10 kV, 8.7/15 kV, 12/20 kV, and 18/30 kV, but these examples are not interchangeable; the correct rating depends on the network and its operating conditions. IEC 60502-2 is one commonly specified standard for extruded-insulation power cables in its defined voltage range, but buyers should confirm the applicable edition and any national or project-specific requirements.

Conductor and Insulation

Specify copper or aluminium conductors and the required cross-sectional area. Conductor selection should follow load calculations, voltage-drop limits, short-circuit requirements, installation conditions, and the project’s accepted design practices. XLPE is a common medium voltage insulation; its permitted operating temperatures and performance requirements must be stated or confirmed against the applicable cable standard and design.

For reference, XLPE cable designs commonly use a maximum conductor temperature of 90°C under normal operating conditions and 250°C for short-circuit conditions of limited duration. These are typical design limits, not a guarantee for every cable or installation. The permitted values and duration must be verified for the selected construction and governing standard.

Metallic Screen, AWA, and Sheath

Describe the metallic screen requirement separately from the armour. Screen material and cross-section relate to electrical field control and earth-fault duty, while AWA primarily provides mechanical protection; one layer should not be assumed to perform the other’s function. Request confirmation of screen construction, armour material and dimensions, and the proposed bonding arrangement.

Choose the outer sheath for the route environment and applicable requirements. Consider exposure to moisture, sunlight, chemicals, soil conditions, fire performance requirements, and the risk of physical damage. If the route includes ducts, direct burial, trays, tunnels, or areas with special environmental conditions, identify these details before the cable is quoted.

Match the Cable to the Application

For buried routes, share the installation method, soil or duct information, expected mechanical exposure, and any requirements for water resistance. For industrial sites, identify chemical exposure, ambient conditions, tray or conduit routing, and the proximity of other power circuits. For utility or infrastructure projects, include the network voltage, fault-level information, earthing approach, and applicable utility specification.

You will get efficient and thoughtful service from Zhongdong Cable Co., Ltd..

AWA can be a practical armour option where a non-magnetic armour material is required, particularly for single-core AC arrangements. It is not automatically the best choice for every circuit: mechanical protection needs, fault-current duty, installation method, and local rules may point to another construction. Ask the design team and supplier to assess the full cable system rather than selecting armour by material name alone.

A Practical Selection Framework

Step 1: Define Electrical Requirements

Record the system and rated voltage, frequency, load current, conductor material, conductor size, and allowable voltage drop. Provide short-circuit current and clearing time where available, along with the required screen and earthing details. These inputs give suppliers a basis for checking conductor and screen design instead of relying on an incomplete cable label.

Step 2: Describe the Route and Environment

State whether the cable will be installed underground, in ducts, on trays, or by another method. Include route length, installation grouping, ambient conditions, moisture exposure, and any special mechanical or fire-performance requirements. These factors can affect sheath choice, current rating, installation planning, and the final cable construction.

Step 3: Confirm Construction and Documentation

List the required conductor, insulation, screen, AWA, and sheath materials, and identify the governing standard and project documents. Ask the supplier to confirm the proposed construction, cable dimensions, drum lengths, marking, and routine test documentation available for the order. If the project needs type-test evidence, inspection, or other quality documents, state those requirements before purchase rather than assuming they are included.

Pricing, MOQ, and Lead Time

Medium voltage cable pricing depends on the specified materials, conductor size, voltage rating, construction, order quantity, drum length, and delivery destination. AWA requirements and project-specific documentation can also affect the quotation scope. Request pricing against a complete technical schedule so that offers can be compared on the same basis.

Minimum order quantity and lead time are order- and production-dependent, so they should be confirmed with the supplier for the requested design and delivery schedule. Include target quantities, required delivery dates, packaging or drum requirements, and shipping destination in the inquiry. Where schedules are tight, ask whether the supplier can propose technically acceptable alternatives for review rather than silently changing the specification.

Supplier Evaluation Checklist

  • Can the supplier confirm the proposed cable construction against your voltage rating and specified standard?
  • Are conductor, insulation, screen, AWA, and sheath details stated clearly in the quotation?
  • Can the supplier identify which routine tests and quality documents are included?
  • Are manufacturing quantity, drum length, packaging, and delivery terms clearly defined?
  • Will technical questions and any proposed deviations be documented for engineering review?

When comparing offers, check for differences in conductor material, screen cross-section, armour construction, sheath compound, test scope, and delivery terms. A lower initial price may not represent an equivalent cable if the technical scope or documentation differs. Keep the approved specification and any accepted deviations with the purchase documentation.

How Zhongdong Cable Co., Ltd. Can Support Your Inquiry

At Zhongdong Cable Co., Ltd., we can review your requested medium voltage AWA cable details and prepare a quotation subject to confirmation of the design and order requirements. To help us assess the request, provide the voltage rating, applicable standard, conductor material and size, installation environment, required construction, quantity, and destination. Drawings or project specifications can also help clarify details that are difficult to capture in a short cable description.

Our team can discuss available product options, documentation requirements, packaging, and delivery planning for your inquiry. Any proposed alternative should be clearly identified for your technical team’s approval before it is treated as an equivalent. Contact us with your cable schedule to begin a focused product evaluation and B2B quotation discussion.

Key Takeaways and Next Steps

  • AWA is aluminium wire armour, often considered for single-core AC cable designs because aluminium is non-magnetic.
  • Confirm voltage rating, standard, conductor, insulation, metallic screen, armour, sheath, and installation conditions as one complete specification.
  • Typical XLPE design references include 90°C normal conductor temperature and 250°C short-circuit conductor temperature, but the selected standard and design must be checked.
  • Compare quotations by technical scope, documentation, order quantity, delivery terms, and any stated deviations.

In short, select medium voltage AWA armoured cable by matching its complete construction to electrical duty, route conditions, and project requirements—not by armour type alone. Your next step is to prepare a cable schedule with the rating, standard, materials, installation details, quantity, and delivery destination, then request supplier confirmation against it. Zhongdong Cable Co., Ltd. can use those details to support a product review and quotation for your project.

Are you interested in learning more about Medium Voltage AWA Armoured Cable? Contact us today to secure an expert consultation!