The purpose of the personal protective equipment policies (PPE) is to protect the employees of [name of company] from exposure to work place hazards and the risk of injury through the use of personal protective equipment (PPE). PPE is not a substitute for more effective control methods and its use will be considered only when other means of protection against hazards are not adequate or feasible. It will be used in conjunction with other controls unless no other means of hazard control exist.
Personal protective equipment will be provided, used, and maintained when it has been determined that its use is required to ensure the safety and health of our employees and that such use will lessen the likelihood of occupational injury and/or illness.
This section addresses general PPE requirements, including eye and face, head, foot and leg, hand and arm, body (torso) protection, and protection from drowning. Separate programs exist for respiratory protection and hearing protection as the need for participation in these programs is established through industrial hygiene monitoring. [List other programs or policies requiring PPE such as hearing protection, respiratory protection, fall protection, etc., that you have at your workplace] are also addressed in [Identify the section or location in your safety program where these are found].
The [name of your business] personal protective equipment policies includes:
[Add any additional responsibilities or delete those that do not apply to your company]
Note: Depending on your business and the number of employees you have, you may simply have a “designated safety person” (who may be a supervisor/lead worker) or a larger organized safety and health unit. Customize this section to fit the needs of your policy.
[Name of safety person] is responsible for the development, implementation, and administration of [name of company] PPE policies. This involves:
Supervisors have the primary responsibility for implementing and enforcing PPE use and policies in their work area. This involves:
The PPE user is responsible for following the requirements of the PPE policies. This involves:
Employees who repeatedly disregard and do not follow PPE policies and rules will be: [add your disciplinary policies]
[Safety or designated person] in conjunction with supervisors, will conduct a walk-through survey of each work area to identify sources of work hazards. Each survey will be documented using the hazard assessment certification form, which identifies the work area surveyed, the person conducting the survey, findings of potential hazards, and date of the survey. [Safety or designated person] will keep the forms in the [specify exact location]
[Safety or designated person] will conduct, review, and update the hazard assessment for PPE whenever:
Any new PPE requirements that are developed will be added into [name of business] written safety program.
Once the hazards of a workplace have been identified, [safety or designated person] will determine if the hazards can first be eliminated or reduced by methods other than PPE,i.e., methods that do not rely on employee behavior, such as engineering controls.
If such methods are not adequate or feasible, then [safety or designated person] will determine the suitability of the PPE presently available; and as necessary, will select new or additional equipment which ensures a level of protection greater than the minimum required to protect our employees from the hazards. Care will be taken to recognize the possibility of multiple and simultaneous exposure to a variety of hazards. Adequate protection against the highest level of each of the hazards will be recommended for purchase.
All personal protective clothing and equipment will be of safe design and construction for the work to be performed and will be maintained in a sanitary and reliable condition. Only those items of protective clothing and equipment that meet NIOSH or ANSI (American National Standards Institute) standards will be procured or accepted for use. Newly purchased PPE must conform to the updated ANSI standards which have been incorporated into the PPE regulations, as follows:
Affected employees whose jobs require the use of PPE will be informed of the PPE selection and will be provided PPE by [name of business] at no charge. Careful consideration will be given to the comfort and proper fit of PPE in order to ensure that the right size is selected and that it will be used.
Any worker required to wear PPE will receive training in the proper use and care of PPE before being allowed to perform work requiring the use of PPE. Periodic retraining will be offered to PPE users as needed. The training will include, but not necessarily be limited to, the following subjects:
After the training, the employees will demonstrate that they understand how to use PPE properly, or they will be retrained.
Training of each employee will be documented using the [name of form company uses i.e.; personal protective equipment training documentation form] and kept on file. The document certifies that the employee has received and understood the required training on the specific PPE he/ she will be using.
The PPE training quiz will be used to evaluate employees’ understanding and will be kept in the employee training records.
The need for retraining will be indicated when
It is important that all PPE be kept clean and properly maintained. Cleaning is particularly important for eye and face protection where dirty or fogged lenses could impair vision. Employees must inspect, clean, and maintain their PPE according to the manufacturers’ instructions before and after each use (see attached). [Attach a copy of the manufacturers cleaning and care instructions for all PPE provided to employees]. Supervisors are responsible for ensuring that users properly maintain their PPE in good condition.
Personal protective equipment must not be shared between employees until it has been properly cleaned and sanitized. PPE will be distributed for individual use whenever possible.
If employees provide their own PPE, make sure that it is adequate for the work place hazards, and that it is maintained in a clean and reliable condition.
Defective or damaged PPE will not be used and will be immediately discarded and replaced.
NOTE: Defective equipment can be worse than no PPE at all. Employees would avoid a hazardous situation if they knew they were not protected; but they would get closer to the hazard if they erroneously believed they were protected, and therefore would be at greater risk.
It is also important to ensure that contaminated PPE which cannot be decontaminated is disposed of in a manner that protects employees from exposure to hazards.
[Company name] believes that a safety and health accident prevention program is unenforceable without some type of disciplinary policy. Our company believes that in order to maintain a safe and healthful workplace, the employees must be cognizant and aware of all company, State, and Federal safety and health regulations as they apply to the specific job duties required. The following disciplinary policy is in effect and will be applied to all safety and health violations.
The following steps will be followed unless the seriousness of the violation would dictate going directly to Step 2 or Step 3.
[Add any additional disciplinary actions or delete those that do not apply to your company]
[See Personal Protective Equipment Training Certification Form, below]
Employee’s name:
Employee ID No.:
Job title/work area:
Employer:
Trainer’s name (person completing this form):
Date of training:
Types of PPE employee is being trained to use (List all PPE used):
The following information and training on the personal protective equipment (PPE) listed above were covered in the training session:
____ The limitations of personal protective equipment: PPE alone cannot protect the employee from on-the-job hazards.
____ What work place hazards the employee faces, the types of personal protective equipment that the employee must use to be protected from these hazards, and how the PPE will protect the employee while doing his/her tasks.
____ When the employee must wear or use the personal protective equipment.
____ How to use the personal protective equipment properly on-the-job, including putting it on, taking it off, and wearing and adjusting it (if applicable) for a comfortable and effective fit.
____ How to properly care for and maintain the personal protective equipment: look for signs of wear, clean and disinfect, and dispose of PPE.
Note to employee: This form will be made a part of your personal file. Please read and understand its contents before signing.
(Employee) I understand the training I have received, and I can use PPE properly.
Employee’s signature: ___________________________________ Date: _________________________________________
(Trainer must check off)
____ Employee has shown an understanding of the training.
____ Employee has shown the ability to use the PPE properly.
Trainer’s signature:______________________________________ Date: ________________________________________
Reference
Washington Department of Labor and Industries
To learn more about Hanover Risk Solutions, visit hanoverrisksolutions.com.
171-0955 (3/17) LC12‐213
With high quality products and considerate service, we will work together with you to enhance your business and improve the efficiency. Please don't hesitate to contact us to get more details of Hooded Protective Coverall, Type 5 Coveralls.