CFD Analysis of Hydraulic Performance in Small Centrifugal Pumps Operating with Slurry

Kassanos, I., Chrysovergis, M., Anagnostopoulos, J., Charalampopoulos, G., Rokas, S., Lekanidis, S., Kontominas, I., Papantonis, D., Numerical Optimization of a Centrifugal Pump Impeller with Splitter Blades Running in Reverse Mode, (2016) International Review of Mechanical Engineering (IREME), 10 (4), pp. 215-224.
https://doi.org/10.15866/ireme.v10i4.8375

Duarte Forero, J., Lopez Taborda, L., Bula Silvera, A., Characterization of the Performance of Centrifugal Pumps Powered by a Diesel Engine in Dredging Applications, (2019) International Review of Mechanical Engineering (IREME), 13 (1), pp. 11-20.
https://doi.org/10.15866/ireme.v13i1.16690

B. Kye, K. Park, H. Choi, M. Lee, and J. H. Kim, Flow characteristics in a volute-type centrifugal pump using large eddy simulation, International Journal of Heat and Fluid Flow vol. 72, pp. 52-60, 2018.
https://doi.org/10.1016/j.ijheatfluidflow.2018.04.016

S. Bai, M. Li, R. Kong, S. Han, H. Li, and L. Qin, Data mining approach to construction productivity prediction for cutter suction dredgers, Automation in Construction, vol. 105, 102833, 2019.
https://doi.org/10.1016/j.autcon.2019.102833

N. Casari, E. Fadiga, M. Pinelli, S. Randi, and A. Suman, Pressure Pulsation and Cavitation Phenomena in a Micro-ORC System, Energies, vol. 12. no. 11, 2019.
https://doi.org/10.3390/en12112186

B. Zardin, E. Natali, and M. Borghi, Evaluation of the Hydro-Mechanical Efficiency of External Gear Pumps, Energies, vol. 12, no. 13, 2019.
https://doi.org/10.3390/en12132468

Singh, R., Nataraj, M., Surendar, S., Siva, M., CFD Simulation and Experimental Verification of the Flow Field in a Centrifugal Separator, (2013) International Review on Modelling and Simulations (IREMOS), 6 (4), pp. 1327-1333.

Kefalas, P. I., Margaris, D. P., Investigation of a Centrifugal Pump Impeller Vane Profile Using CFD, (2009) International Review on Modelling and Simulations (IREMOS), 2 (4), pp. 472-478.

Al Asemi, H., S. M. A., A., Zahari, R., Aziz, F., Ahmad, K., Application of Computational Fluid Dynamics in Piping Distribution System and Special Focus on the Arabian Peninsula: a Review, (2019) International Review of Mechanical Engineering (IREME), 13 (1), pp. 1-10.
https://doi.org/10.15866/ireme.v13i1.15801

F. Maluta, A. Paglianti, and G. Montante, RANS-based predictions of dense solid-liquid suspensions in turbulent stirred tanks, Chemical Engineering Research and Design, vol. 147, pp. 470-482, 2019.
https://doi.org/10.1016/j.cherd.2019.05.015

J. Heng, T. H. New, and P. A. Wilson, Application of an Eulerian granular numerical model to an industrial scale pneumatic conveying pipeline, Advanced Powder Technology, vol. 30, no.2, pp. 240-256, 2019.
https://doi.org/10.1016/j.apt.2018.10.028

Obregon, L., Valencia, G., Duarte Forero, J., Efficiency Optimization Study of a Centrifugal Pump for Industrial Dredging Applications Using CFD, (2019) International Review on Modelling and Simulations (IREMOS), 12 (4), pp. 245-252.
https://doi.org/10.15866/iremos.v12i4.18009

R. Tarodiya, and B.K. Gandhi, Numerical simulation of a centrifugal slurry pump handling solid-liquid mixture: Effect of solids on flow field and performance, Advanced Powder Technology, vol. 30, no.10, pp. 2225-2239, 2019.
https://doi.org/10.1016/j.apt.2019.07.003

C. Shao, A. He, Z. Zhang, and J. Zhou, Study on the transition process of a molten salt pump transporting media with crystalline particles by modeling test and numerical simulation. International Journal of Numerical Methods for Heat & Fluid Flow, vol. 29, no. 9, pp. 3263-3289, 2019.
https://doi.org/10.1108/hff-12-2018-0807

Y. Gu, N. Liu, J. Mou, P. Zhou, H. Qian, and D. Dai, Study on solid-liquid two-phase flow characteristics of centrifugal pump impeller with non-smooth surface, Advances in Mechanical Engineering, vol. 11, no.5, pp. 1-12, 2019.
https://doi.org/10.1177/1687814019848269

W. Zhao and G. Zhao, Numerical investigation on the transient characteristics of sediment-laden two-phase flow in a centrifugal pump, Journal of Mechanical Science and Technology, vol. 31, no.1, pp. 167-176, 2018.
https://doi.org/10.1007/s12206-017-1218-6

Y. Liao, T. Ma, E. Krepper, D. Lucas, and J. Fröhlich, Application of a novel model for bubble-induced turbulence to bubbly flows in containers and vertical pipes, Chemical Engineering Science, vol. 202, pp. 55-69, 2019.
https://doi.org/10.1016/j.ces.2019.03.007

S. K. Senapati, and S. K. Dash, Dilute gas-particle flow through thin and thick orifice: a computational study through two fluid model, Particulate Science and Technology, pp. 1-15, 2019.
https://doi.org/10.1080/02726351.2019.1566939

B. Wu, X. L. Wang, H. Liu, and H.L. Xu, Numerical simulation and analysis of solid-liquid two-phase three-dimensional unsteady flow in centrifugal slurry pump, Journal of Central South University, vol. 22, no. 8, pp. 3008-3016, 2015.
https://doi.org/10.1007/s11771-015-2837-7

B. Hallmark, C..H. Chen, and J.F. Davidson, Experimental and simulation studies of the shape and motion of an air bubble contained in a highly viscous liquid flowing through an orifice constriction, Chemical Engineering Science, vol. 206, pp. 272-288, 2019.
https://doi.org/10.1016/j.ces.2019.04.043

H. Yousefi, Y. Noorollahi, M. Tahani, R. Fahimi, and S. Saremian, Numerical simulation for obtaining optimal impeller’s blade parameters of a centrifugal pump for high-viscosity fluid pumping, Sustainable Energy Technologies and Assessments, vol. 34, pp. 16-26, 2019.
https://doi.org/10.1016/j.seta.2019.04.011

Pathan, K., Dabeer, P., Khan, S., An Investigation to Control Base Pressure in Suddenly Expanded Flows, (2018) International Review of Aerospace Engineering (IREASE), 11 (4), pp. 162-169.
https://doi.org/10.15866/irease.v11i4.14675

Penkov, I., Aleksandrov, D., Efficiency Optimization of Mini Unmanned Multicopter, (2017) International Review of Aerospace Engineering (IREASE), 10 (5), pp. 267-276.
https://doi.org/10.15866/irease.v10i5.12132

Salim, W., Ahmed, S., Prediction of Turbulent Swirling Flow in a Combustor Model, (2016) International Review of Aerospace Engineering (IREASE), 9 (2), pp. 43-50.
https://doi.org/10.15866/irease.v9i2.9562

Gridina, E., Andreev, R., Mathematical Modeling Based on CFD Method of Wind Currents in Combined Working Out of the Olenegorsky Pit in the FlowVision Software Package, (2017) International Review on Modelling and Simulations (IREMOS), 10 (1), pp. 62-69.
https://doi.org/10.15866/iremos.v10i1.11101